Just what you need. Neither more nor less.
Grinding oil as clean as new.
ELITE model FILTRAmaq mini
Filtration of carbide in grinding fluids. Doesn’t matter if it’s water soluble or pure oil.
It’s mini, but only in size.
Specially designed for small grinding machines. Now grinding shops have the possibility to have the same filtration quality of large manufacturers. No need for expensive filtration systems to provide the highest sharpening quality.
Always on the run
With centralized filtration systems, if the system breaks down the machines which depend on stop working. FILTRAmaq mini operates autonomously to the attached machine.
And it also happens that saves a huge amount of space.
STOP machine breakdowns
By working continuously with coolant completely free of particles, the wear on guides and spindles of the machine diminishes, saving costly repairs that exceed several times the price of FILTRAmaq mini.
In addition this will allow higher grinding quality and increases grinding wheel lifetime because no particles come between wheel and tool.
Carbide powder acting as emery wearing bearings and machine guides.
1 µm filtration
Filters particles so small that your coolant comes back to live again, you can appreciate this in the color change experienced on the coolant.
Left SintoCut MD oil new.
Amid the same oil with 3 years of use: 8h/day – 6 days a week in a sharpening machine of circular saws with carbide tips.
Right after filtering it with FILTRAmaq mini.
Always the highest quality
The same quality of filtration at the beginning and the end of the life of the filter cartridge.
Welcome to ecology
Together with our grinding oil SintoCut PRO MD, you will no longer have to throw the dirty oil.
Very easy to use: only incorporates a filter cartridge change indicator and an on/off switch.
Designed with small and mid size grinding machines in mind.
Perfecto para máquinas tales como la Vollmer CX-100, Walter Woodtronic NC3 o AKE U4.
Plug and play!
It is very easy to set up, introduce the two tubes in your machine tank for the input and output of the dielectric, connect the FILTRAmaq mini to 220V. plug and you can switch it on.
- Filtration quality: particles up to 1 µm.
- You can choose filtering quality: 1, 3, 5 or 8 µm.
- Flow rate 5 l/min.
- Lifetime of filter cartridge: up to 6 Kg.
- Recommended maximum viscosity of oil: 10 cSt.
|Flow rate||5 liters/minute|
|Filtration quality||particles up to 1 µm|
|Size||466x382x615 mm. (L x W x H)|
|Connected load||0,5 kW|
|Net weight||60 Kg.|