A giant step. In many ways.
Grinding oil as clean as new.
ELITE model FILTRAmaq
Filtration of carbide in grinding fluids. Doesn’t matter if it’s water soluble or pure oil.
The time to have a centralized filtering unit connected to mid-size machines has gone. Now there is no need to do it to have a perfect filtered coolant and thus the maximum grinding quality.
Always on the run
With centralized filtration systems, if the system breaks down the machines which depend on stop working. FILTRAmaq operates autonomously to the attached machine.
And it also happens that saves a huge amount of space.
STOP machine breakdowns
By working continuously with coolant completely free of particles, the wear on guides and spindles of the machine diminishes, saving costly repairs that exceed several times the price of FILTRAmaq mini.
In addition this will allow higher grinding quality and increases grinding wheel lifetime because no particles come between wheel and tool.
Carbide powder acting as emery wearing bearings and machine guides.
1 µm filtration
Filters particles so small that your coolant comes back to live again, you can appreciate this in the color change experienced on the coolant.
Left SintoCut MD oil new.
Amid the same oil with 3 years of use: 8h/day – 6 days a week in a sharpening machine of circular saws with carbide tips.
Right after filtering it with FILTRAmaq mini.
Always the highest quality
The same quality of filtration at the beginning and the end of the life of the filter cartridge.
Welcome to ecology
Together with our grinding oil SintoCut PRO MD, you will no longer have to throw the dirty oil.
Very easy to use: only incorporates a filter cartridge change indicator and an on/off switch.
You can connect together as many FILTRAmaq as you want, even between different models.
Plug and play!
It is very easy to set up, introduce the two tubes in your machine tank for the input and output of the coolant, connect the FILTRAmaq to 220V. plug and you can switch it on.
- Filtration quality: particles up to 1 µm.
- You can choose filtering quality: 1, 3, 5 or 8 µm.
- Flow rate 10 l/min.
- Lifetime of filter cartridge: up to 20 Kg.
- Recommended maximum viscosity of oil: 10 cSt.
|Flow rate||10 liters/minute|
|Filtration quality||particles up to 1 µm|
|Size||510x740x690 mm. (L x W x H)|
|Connected load||0,8 kW|
|Net weight||130 Kg.|