- ELITE - http://www.elite.es/en -

Drills and countersinks sharpening machine ELITE AFILAmaq B 20

Posted By ELITE On 11/05/2011 @ 18:06 In | Comments Disabled

ELITE model AFILAmaq B 20

The economical drills sharpening machine

ELITE model AFILAmaq B 20

Drills sharpening machine of 1 to 20 mm. in diameter with 2, 3 or 4 left or right cuts.

Fast and accurate sharpening of drills.
The machine includes as standard a useful loupe to check both the wear of the drill as the result of the sharpening without the need to remove the drill of the machine.

Sharpening load is adjusted with the frontal vernier to obtain an homogeneous and precise load.
In case of need to centering the drill with the grinding wheel lateral vernier is used.
The base machine includes a template with standard grades of drills marked as, to make it very easy to obtain the correct degrees.

 

From only 795 €.

Avaliable in our store

Modelo AFILAmaq B 20

- Frontal adjustment of load sharpening with precision vernier.
- Lateral adjustment for centering the edge of drill relative to the grinding wheel.
- Incorporated loupe as standard to check the load required regarding the wear of drill and the result of the sharpening without the need to remove the drill of the machine.
- For drills with left or right cuts.
- Drill diameter: of 1 to 20 mm.
- Corundum grinding wheel of ø125 x 20 x 20 mm. included.

AFILAmaq B 20
Sharpening capacityFor drills of ø1 to 20 mm.
0,08 a 0,79 inches
Type of drillsFor wood or steel drills of 2, 3 or 4 left or right cuts.
Connection voltage110/220 V. Monophase
Weight9 Kg.

Article printed from ELITE: http://www.elite.es/en

URL to article: http://www.elite.es/en/sharpening/drill-bits/elite-afilamaq-b-20/

©ELITE C&A, SCP - All rights reserved.