MANUAL GRINDING MACHINE FOR REPAIRING CARBIDE-TIPPED CIRCULAR SAW BLADES FROM ø100 TO ø850 MM.
- Integrated cooling unit as an option
- Robust and very simple design that allows continued use of the machine without breakdowns
- Easy to use
- Very compact machine with a wide range of disc diameters: from 100 to 850 mm.
ELITE GBT 850 mono. MACHINE BASIS.
The ELITE model GBT 850 mono is our sides grinder for circular saws with tungsten carbide teeth.
It is equipped with a single wheel and its operation is manual.
Allows precise and fast sharpening of the teeth to leave the saw in its original state after a complete re-tipping of teeth or partial saw repair.
ELITE GBT 850 mono. HOW IT WORKS
Simple and easy to use control panel
The machine includes the LED cabin light as standard.
The control panel allows the selection of sense of direction of the grinding wheel to the left or right.
The grinding wheel motor with a motorized direct spindle system rotates at 9,000 RPM for optimum sharpening quality with minimal stone wear. It is driven by a frequency converter.
Saw diameter from 100 mm.
For grinding the flanks of scoring discs or portable machines.
Allows the indexing of any type of tooth pitch.
Integrated refrigeration unit
Allows wet sharpening for better surface quality and longer grinding wheel life.
It integrates a 200 liter tank with removable grids for easy cleaning.
Available as an option.
Sharpening the sides of the teeth
Clean design and easy access for the revision or repair of the machine.
The electrical panel is located in the lower part and the mechanics in the upper part of the machine, protected by an easy-to-open cover.
The electrical cabinet is organized in a clean manner, so the maintenance is easy when you need to do it.
ELITE GBT 850 MONO. SPECIFICATIONS
|TECHNICAL DATA||GBT 850 MONO|
|Saw blade diameter||From ø100 to ø850 mm. (4" to 33,5")|
|Saw blade hole diameter||From ø10 mm. (0,4")|
|Saw blade body thickness||Up to 8 mm. (0,31")|
|Tooth pitch||Any tooth pitch is possible|
|Sharpening path||Up to 40 mm. (1,57")|
|Rake angle||From -15º to +30º|
|Radial cutting angle||From -5º to +6º|
|Tangential cutting angle||From 0º to 8º|
|REFRIGERATION EQUIPMENT||Optionaly available|
|Tank capacity||220 liters|
|Coolant flow rate||Up to 40 liters/minute|
|Motor wheel||0,75 kW|
|Wheel speed||9000 RPM|
|Grinding wheel diameter||ø100 mm.|
|Grinding wheel hole diameter||ø20 mm.|
|Machine dimensions||1300 x 800 x 1600 mm.|
|Machine weight||400 Kg.|
MACHINES COMPARISONS AT A GLANCE
|MODEL||TOP GRINDING||FACE GRINDING||BACK OFF GRINDING||SIDES GRINDING|
|AVB 850||All tooth shapes||All tooth shapes||No||No|
|SVG 850||All tooth shapes||Flat teeth||No||No|
|MD 650||All tooth shapes||All tooth shapes||No||No|
|MVB 850||Flat teeth||Flat teeth||Yes||No|
|GBT 850 mono||No||No||No||Yes: One side at a time|
|GBT 850 DUO||No||No||No||Yes both sides at same time|
|GBT 851 DUO||No||No||No||Yes both sides at same time|